This is specifically for AOS-8 series
Omniswitch.(10K-6900-6860)
Your software upgrade file should have a Image file.
Your software upgrade file should have a Image file.
1.
Take a copy of your working directory so you have a backup of the current
code:
-> cp -r working working_prev
2.
Place the new image file in your working directory
-> scp user@host:Tos.img ./working
3.
Copy the other two files (if they exist) into the current directory
-> scp user@host:u-boot.tar.gz .
-> scp user@host:tor_fpgas.vme .
4.
Upgrade the U-Boot file (if the file exists)
-> update uboot cmm 1 file u-boot.x.x.tar.gz
5.
Upgrade the fpga (if the file exists)
-> update fpga cmm 1 file tor_fpgas.vme
6.
You can now remove the u-boot and fpga files
-> rm u-boot.x.x.tar.gz
-> rm tor_fpgas.vme
7.
Upgrade the switch software by rebooting the switch from the working
directory
-> reload from working no rollback-timeout
8.
Check the software version after reboot
-> show microcode
/flash/certified Package Release Size Description
-----------------+-------------------------+--------+-----------------------
Tos.img 8.5.R04 126642216 Alcatel-Lucent OS
9.
If all looks well after the reboot you can copy the current config/software
to the certified config
-> copy running certified
10.
If all doesn't look well you can always revert to the previous version in
your copy of the working directory
-> cp -r working_prev working
-> reload from working no rollback-timeout
